Systems and components for industrial enclosures including fan filters, frame fans, heaters, cooling units, regulators, lights, and signal devices.
VENTILATION SYSTEMS
FAN FILTERS
FRAME FANS
HEATERS
COOLING UNITS
CLIMATE CONTROL SYSTEMS
AMBIENT CONTROL SYSTEMS
REGULATORS
LIGHTS
SIGNAL DEVICES
AMBIENT CONTROL SYSTEMS
FAN FILTERS
Increasingly often, the causes behind malfunctions or faults in electrical and electronic equipment housed in control panels or fitted as an integral part of a machine, are due to heart problems. In reality, the life span of components depends on the temperature and level of humidity inside the electrical cabinet. The normal recommended average operating temperature inside a cabinet is 35°C with a relative humidity of no more than 60%.
FPF SERIES
FPF SERIES
Fan filters are a practical solution for removing heat from the cabinet.
The channel filtered ambient air into the enclosure, expelling warm internal air through an exhaust filter or roof unit to reduce temperatures and protect electronic components from overheating.
FPF fan filters are the first series of Fandis filtering solutions for enclosures. These units have a low external profile to avoid obstruction and are easy to mount on standard panel cutouts with a fast snap-on assembly.
GF SERIES FAN FILTERS
The GF fan filter range is characterized by an innovative mounting system with jacks, which accommodate both plastic and plate enclosures with thick-wall applications.
Fandis offers three different series of fan filters to better satisfy various cooling and ventilation requirements.
An integrated sealing of the gasket also provides secure dust and water protection.
This series has the advantage of a fast outer installation, without extra drilling, and an easy filter replacement through the original hinged protection guard.
ROOF EXHAUST UNITS
Roof exhaust units are commonly used in restricted spaces to dissipate hot air that is extracted from the top of enclosures. These units can be provided with an exhaust filter for either convection cooling or forced air-cooling in combination with a fan.
Axial fans and blowers provide forced-air cooling solutions to temperature-sensitive applications. The large airflow and low noise axial fans are designed for ventilation and spot cooling of internal machinery components, especially in areas with confined spaces. Blowers, on the other hand, produce more concentrated airflow and are suitable to work with high impedance systems. A variety of AC, DC, and energy-efficiency EC fans in different sizes, air volumes, and pressures satisfies each industrial requirement.
STANDARD FRAME FANS
AC axial fans
Axial fans are named for the direction of the airflow they create. Blades rotating around an axis draw air in parallel to that axis and force air out in the same direction.
Axial fans create airflow with a high flow rate, meaning they create a large volume of airflow.
DC axial fans
DC axial fans, DC brushless motor technology delivers lasting performance at a lower cost of operation.
DC axial fans are widely used across industries for cooling electrical machines and equipment.
DC centrifugal fans
A DC centrifugal fan is a mechanical device with rotating impellers from which it draws kinetic energy to push out the air in a particular direction. It has a housing or an enclosure that helps maintain the direction of the outgoing air or gas.
ANTI-CONDENSATION HEATERS
Heaters are used for warming up the air inside enclosures, protecting electrical and electronic components from condensation and corrosion. Fandis heaters have a self-regulating function that is designed to maintain optimal temperatures within enclosures.
This clamping solution allows you to reduce wiring time and assures an optimum connection over the entire service life.
Heaters are equipped with screwless terminals for a fast connection.
H SERIES with cable and terminal block
Heaters with built-in fans provide forced air circulation to guarantee an even heat distribution in enclosures, thus minimizing the risk of condensation.
H SERIES with fan
ANTI-CONDENSATION HEATERS
The range of RAC anti-condensation heaters is designed with built-in temperature limiting PTC devices that prevent over-heating. This series protects cabinet components from the harmful effects of condensation and corrosion, keeping internal temperatures within acceptable operational limits. RAC heaters feature cable or terminal block connections and heating power from 15 to 150W.
Flat spiral configurations can be used in high-tech manufacturing while a star wound cable can be used for air and gas heating.
RAC SERIES with cable
terminal blocks are available in our range of accessories and are mainly used for infrared heaters.
RAC SERIES with terminal block
THERMOELECTRIC UNITS
A thermoelectric unit is a solid-state device, which can operate as a heat pump to transfer heat utilizing the Peltier effect. These thermoelectric air conditioners represent a cost-effective solution for cooling electronic equipment housed in small enclosures to provide reliable performance without the use of CFCs.
Thermoelectric devices are semiconductor heat refrigeration units that use the Peltier effect to create a heat flux between the two surfaces of the module.
DC THERMOELECTRIC UNITS
Designed for enclosure in industrial settings, the AC cooling unit fit an integrated AC power supply system on the outer cover, saving internal space and avoiding additional thermal load inside the unit.
AC THERMOELECTRIC UNITS
MECHANICAL REGULATORS
Temperature and humidity regulators help to guarantee the optimal conditions inside the enclosure for trouble-free operations with electrical components. They are used for controlling fan filters, heaters, or for switching signal devices.
Thermoelectric devices are semiconductor heat refrigeration units that use the Peltier effect to create a heat flux between the two surfaces of the module.
NO-NC THERMOSTATS
Twin thermostats integrate two independently switchable devices within one compact unit, allowing the simultaneous control of heating and cooling equipment or signaling equipment.
TWIN THERMOSTATS
HYGROSTATS
When used with heaters or fan filters, hygrostats keep the relative humidity (RH) levels of enclosures below the dew point and prevent
condensation from forming on electrical components.
Thermoelectric devices are semiconductor heat refrigeration units that use the Peltier effect to create a heat flux between the two surfaces of the module.
NO-NC THERMOSTATS
Flashing devices ensure safety for enclosure inspections. They help prevent accidents by alerting operators when doors are opened of live voltage within the electrical system through flashing lights.
FLASHING SIGNAL DEVICE
Limit switches are a practical solution for sensing applications in enclosures. They are mechanically activated to switch on the lamp or switch off live voltage inside the cabinet.
DOOR LIMIT SWITCHES
ENCLOSURE LED LIGHTS
When carrying out maintenance in electrical enclosures, good lighting is essential in order to ensure optimal inspection and control conditions. Fandis conventional fluorescent lamps and LED lights are specifically designed to maximize performance, brightness, and energy saving.
FLL SERIES
Fandis LED lamps are a durable and energy-efficient solution for enclosure lighting. They offer longer service life and lower maintenance costs than fluorescent systems.
OTHER LED LIGHTS
The fluorescent lamps with built-in electronic ballasts are compact and flicker-free, making them suitable for enclosure application where a high level of brightness is critical for inspection.
ENCLOSURE FLUORESCENT LIGHTS
SIGNAL TOWERS
Signal towers are important optical and acoustic accessories for protecting the working environment and ensuring the efficiency of automated processes. These indicators provide alerts on anomalous situations and with regard to the machine’s operating conditions.
ST70 SIGNAL TOWERS